Care and Maintenance
Eva-Last Composite Decking is designed for easy maintenance. Routine cleaning involves using soapy water and a soft-bristled brush or mop to remove dirt and debris. For thorough cleaning, you can use Eva-Last’s recommended cleaning agents, which are gentle yet effective for maintaining the deck's appearance.
We recommend applying Cutek Extreme CD50 or Intergrain products every 12–18 months, or as needed, depending on weather exposure and foot traffic. Both brands provide excellent protection and help maintain the beauty and durability of your timber decking over time.
For fresh stains, clean the area immediately using warm soapy water and a soft brush. For tougher stains, use a mild household degreaser or composite deck cleaner. Always follow the product instructions and avoid abrasive cleaning tools that could damage the surface.
To keep modwood decking looking great, regular sweeping and cleaning with mild household cleaners are recommended. For general dirt and grime, use products like sugar soap mixed with water or a composite deck cleaner such as aqualis composite bright. Avoid high-pressure cleaners, as they may damage the deck's surface. for stubborn stains, products like kenco degreaser or sosafe deck cleaning solutions are effective when scrubbed in and rinsed off gently.
To clean Trex decking, use a mild soap solution and warm water. A soft-bristle brush or mop can help remove dirt. For tougher stains, a composite deck cleaner is recommended. Avoid using harsh chemicals or abrasive tools that can damage the surface.
Cleaning Millboard decking is simple. Use a soft-bristled brush and warm soapy water to remove dirt and debris. For more stubborn stains, a low-pressure hose or gentle cleaning products (non-abrasive) can be used. Avoid harsh chemicals or pressure washers above 1500 PSI, as they may damage the surface.
Use products like Cutek Extreme CD50 to protect timber from moisture, splitting, and fungal decay. For colour enhancement, choose from the range of Cutek Colourtones.
Cleaning is easy: use warm soapy water and a soft brush or sponge to remove dirt and debris. For tougher stains, a gentle pressure wash (under 1,500 PSI) or deck cleaner can be used. Avoid abrasive tools or chemicals.
Start by cleaning with Cutek Quickclean to remove everyday dirt. For heavily weathered timber, use Cutek restore to revive the surface and remove tannins or stains. Protect the decking with Cutek Extreme CD50 or Cutek wood preservative, which deeply penetrate to control moisture and minimize cracking.
Collections and Returns
Customers are welcome to collect their orders from our premises, conveniently located at Franz Building Supplies, c2/174 Barrington Street, Bibra Lake wA 6163. Our collection hours are monday to thursday from 7:00 am to 4:30 pm and friday from 7:00 am to 4:00 pm. we are closed on saturdays and sundays.
to streamline your collection experience, we encourage you to contact us in advance at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au. confirming your order and ensuring your vehicle is suitable for transporting your items helps ensure a smooth process.
transportation safety
at franz building supplies, safety is a priority. goods will only be released if the customer has a vehicle capable of securing the load safely and legally. western australian law strictly prohibits the transport of unsecured loads to ensure public road safety, and we adhere to these regulations by refusing the release of goods intended for unsafe transport.
to assist customers, here are key guidelines:
- for cars (sedans or suvs), loads must not extend more than 1.2 meters beyond the front or rear of the vehicle and cannot exceed 150 millimeters past the sides. roof load limits are typically around 50 kg, including the weight of roof racks.
- for utes, rear loads must not extend more than 1.2 meters beyond the tray without a visible flag or marker. roof racks on utes can generally support up to 100 kg, provided the load is evenly distributed.
it is essential that all loads are securely fastened to prevent shifting during transit. both overloading and uneven distribution can compromise safety and are strictly prohibited under western australian regulations.
need assistance?
if you have any questions or need assistance with collections or deliveries, our team is here to help. please contact us at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au, and we will be happy to assist.
Franz building supplies provides delivery services to the perth metro area, covering regions from secret harbour to butler. for areas outside of this catchment area, delivery fees are available upon request. our team has access to real-time updates on scheduled deliveries, allowing us to assist with any changes or inquiries you may have.
to arrange a delivery, please contact us by phone at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au. we will coordinate with you to schedule a delivery at a time that suits your needs.
delivery fees
our current delivery fees are as follows:
$150.00 + gst for orders requiring a hiab unload (typically for larger orders).
$80.00 + gst for orders that can be hand unloaded (such as skirting, mouldings, doors, hardware, or small timber orders).
access for delivery
to ensure successful delivery, customers must ensure our driver has access to the delivery location. our driver will call when they arrive at the scheduled delivery address. if there is no access for delivery and the goods cannot be delivered, the delivery fee will still apply. the goods will then be returned to our premises. the customer will have the option to pay for a redelivery or arrange their own collection from our location.
changes to delivery schedule
to maintain smooth operations, we request that any changes or cancellations to your delivery be communicated to us at least 24 hours before the scheduled time. this helps us adjust our schedules and provide optimal service.
if you have any questions or need further assistance, please contact us at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au. we are here to ensure a smooth and efficient delivery experience.
If you have any questions or need further assistance with your collection or delivery, please contact us at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au. Our team is happy to assist.
You can collect your order from our premises at franz building supplies, located at c2/174 barrington street, bibra lake wa 6163. our collection hours are monday to thursday from 7:00 am to 4:30 pm and friday from 7:00 am to 4:00 pm. we are closed on saturdays and sundays.
To arrange a collection, please contact us at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au. we recommend confirming your order and ensuring your vehicle is suitable for transporting your items before arriving to ensure a smooth process.
Returns Policy
Franz Building Supplies take pride in supplying quality products and providing efficient, reliable service. Under Australian Consumer Law, we will always accept returns and provide a remedy (refund, repair, or replacement) when goods are:
- Faulty or defective
- Not as described
- Not fit for purpose
Change of Mind / Overordered Items
If a return for change of mind or overordering is requested, acceptance is entirely at our discretion and subject to the following conditions:
- Goods must be returned within 14 days of delivery or collection
- Returns are only accepted if approved before goods are returned to us
- Items must be in as-new, re-saleable condition (as assessed by us on inspection)
Restocking and handling fees apply to all approved returns:
For stocked items:
- 15% restocking fee (capped at $250 + GST)
- Collection fees apply if pickup from site is needed:
- $80 + GST for hand load pickups
- $150 + GST for Hiab truck pickups
For non-stocked / special-order items:
- Returns only accepted if our supplier allows us to return the goods (this must be confirmed before the goods come back to us)
- Minimum 15% restocking fee, with no maximum (actual fee will depend on what our supplier charges us)
- Collection fees as per stocked items (above)
Important Notes:
- All credits are processed only after goods have been inspected and accepted as re-saleable
- Any return outside of these terms must be approved by senior management prior to confirmation
If we have made an error with your order, restocking and pickup fees do not apply.
For any returns or requests, customers are advised to contact the sales team at Franz Building Supplies by calling 08 9434 5775 or emailing sales@franzbuildingsupplies.com.au and a team member will respond to assist.
Delivery
Yes, we offer delivery within the Perth metro area, from secret harbour to butler. Delivery fees start at $80 + GST for small orders and $150 + GST for larger orders requiring Hiab unloading. For locations outside this area, fees are available upon request. Please contact us at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au to arrange your delivery or make any changes. We kindly ask for 24 hours' notice for delivery changes or cancellations.
To maintain smooth operations, we request that any changes or cancellations to your delivery be communicated to us at least 24 hours before the scheduled time. this ensures that we can adjust our schedules and provide the best service possible.
Yes, you can collect your materials from Franz Building Supplies at C2/174 Barrington Street, Bibra Lake WA 6163. Our collection hours are Monday to Thursday, 7:00 am to 4:30 pm, and Friday, 7:00 am to 4:00 pm. To streamline the process, we recommend contacting us in advance at (08) 9434 5775 or sales@franzbuildingsupplies.com.au. Please ensure your vehicle is suitable for safe transport, adhering to Western Australian road safety regulations.
Our delivery fees are as follows:
$150.00 + gst for orders that require a hiab unload (typically larger orders).
$80.00 + gst for orders that can be hand unloaded (such as skirting, mouldings, doors, hardware, or small timber orders).
For a successful delivery, please ensure our driver has access to the delivery location. our driver will call upon arrival. if access is not available and goods cannot be delivered, the delivery fee will still apply. the goods will be returned to our premises, and you can either pay for a redelivery or arrange your own collection.
Deliveries are available for the perth metro area, covering regions from secret harbour to butler. for deliveries outside of this area, delivery fees are available upon request. to arrange a delivery, please contact us at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au, and we will coordinate a suitable delivery time.
Environmental and Sustainability
Yes, it’s made from 95% post-industrial and post-consumer recycled materials. By using sustainable practices, NewTechWood helps reduce waste while offering an eco-friendly alternative to traditional timber.
Yes, Modwood is made from approximately 90% recycled materials, including reclaimed wood waste and recycled plastic, making it a sustainable choice. Additionally, it does not require staining, painting, or sealing, further reducing its environmental impact.
Eva-Last decking blends bamboo fibers and recycled plastic, creating a durable, eco-friendly material. The inclusion of bamboo, a renewable resource that enhances the deck's strength and sustainability. Advanced ranges like infinity are also capped for extra protection​.
Yes, Millboard is eco-friendly. It contains no wood content, which means no trees are cut down to produce it. Additionally, the manufacturing process minimises waste and emissions, and the boards are fully recyclable.
Eva-Last prides itself on sustainability. The decking uses recycled materials like bamboo fibers and plastic and is manufactured through eco-friendly processes. This reduces the environmental impact compared to traditional timber​.
It is made from a blend of 95% recycled materials, including reclaimed wood fibers and high-density polyethylene plastics. This composition ensures durability, sustainability, and a natural timber-like appearance.
Yes, timbers like Blackbutt and Fijian Mahogany are sustainably harvested. Pair them with Cutek products, which are non-toxic and free from harmful additives, ensuring minimal environmental impact.
General
At Franz Building Supplies, we proudly stock a wide range of high-quality brands trusted by professionals in the building and construction industry. Our product offerings include brands known for their reliability, innovation, and durability, ensuring that our customers have access to the best materials available.
We supply both trade professionals and the general public. whether you're a contractor, builder, or diy enthusiast, you’re welcome to shop with us.
Customers are welcome to collect their orders from our premises, conveniently located at Franz Building Supplies, c2/174 Barrington Street, Bibra Lake wA 6163. Our collection hours are monday to thursday from 7:00 am to 4:30 pm and friday from 7:00 am to 4:00 pm. we are closed on saturdays and sundays.
to streamline your collection experience, we encourage you to contact us in advance at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au. confirming your order and ensuring your vehicle is suitable for transporting your items helps ensure a smooth process.
transportation safety
at franz building supplies, safety is a priority. goods will only be released if the customer has a vehicle capable of securing the load safely and legally. western australian law strictly prohibits the transport of unsecured loads to ensure public road safety, and we adhere to these regulations by refusing the release of goods intended for unsafe transport.
to assist customers, here are key guidelines:
- for cars (sedans or suvs), loads must not extend more than 1.2 meters beyond the front or rear of the vehicle and cannot exceed 150 millimeters past the sides. roof load limits are typically around 50 kg, including the weight of roof racks.
- for utes, rear loads must not extend more than 1.2 meters beyond the tray without a visible flag or marker. roof racks on utes can generally support up to 100 kg, provided the load is evenly distributed.
it is essential that all loads are securely fastened to prevent shifting during transit. both overloading and uneven distribution can compromise safety and are strictly prohibited under western australian regulations.
need assistance?
if you have any questions or need assistance with collections or deliveries, our team is here to help. please contact us at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au, and we will be happy to assist.
Yes, our on-site workshop can custom-run mouldings, weatherboards, and standard doors to suit specific design needs. we also offer bespoke joinery through our sister company, abbott'solutely timber joinery.
We provide trade accounts and tailored pricing for industry professionals. contact us to learn more about eligibility and account setup.
Our experienced team is here to assist with more than just decking, cladding, and joinery. we provide expert advice across a wide range of building materials, including timber, hardware, fixings, and architectural elements. whether you’re working on a residential renovation, commercial build, or custom joinery, we’ll guide you in choosing the best products for your specific requirements. from design concept to material selection, we aim to ensure your project runs smoothly and meets your expectations.
If you have any questions or need further assistance with your collection or delivery, please contact us at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au. Our team is happy to assist.
You can collect your order from our premises at franz building supplies, located at c2/174 barrington street, bibra lake wa 6163. our collection hours are monday to thursday from 7:00 am to 4:30 pm and friday from 7:00 am to 4:00 pm. we are closed on saturdays and sundays.
To maintain smooth operations, we request that any changes or cancellations to your delivery be communicated to us at least 24 hours before the scheduled time. this ensures that we can adjust our schedules and provide the best service possible.
Yes, we provide cutting services to help you get materials prepared to your exact specifications. contact us for details on this service.
To arrange a collection, please contact us at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au. we recommend confirming your order and ensuring your vehicle is suitable for transporting your items before arriving to ensure a smooth process.
Returns Policy
Franz Building Supplies take pride in supplying quality products and providing efficient, reliable service. Under Australian Consumer Law, we will always accept returns and provide a remedy (refund, repair, or replacement) when goods are:
- Faulty or defective
- Not as described
- Not fit for purpose
Change of Mind / Overordered Items
If a return for change of mind or overordering is requested, acceptance is entirely at our discretion and subject to the following conditions:
- Goods must be returned within 14 days of delivery or collection
- Returns are only accepted if approved before goods are returned to us
- Items must be in as-new, re-saleable condition (as assessed by us on inspection)
Restocking and handling fees apply to all approved returns:
For stocked items:
- 15% restocking fee (capped at $250 + GST)
- Collection fees apply if pickup from site is needed:
- $80 + GST for hand load pickups
- $150 + GST for Hiab truck pickups
For non-stocked / special-order items:
- Returns only accepted if our supplier allows us to return the goods (this must be confirmed before the goods come back to us)
- Minimum 15% restocking fee, with no maximum (actual fee will depend on what our supplier charges us)
- Collection fees as per stocked items (above)
Important Notes:
- All credits are processed only after goods have been inspected and accepted as re-saleable
- Any return outside of these terms must be approved by senior management prior to confirmation
If we have made an error with your order, restocking and pickup fees do not apply.
For any returns or requests, customers are advised to contact the sales team at Franz Building Supplies by calling 08 9434 5775 or emailing sales@franzbuildingsupplies.com.au and a team member will respond to assist.
Our delivery fees are as follows:
$150.00 + gst for orders that require a hiab unload (typically larger orders).
$80.00 + gst for orders that can be hand unloaded (such as skirting, mouldings, doors, hardware, or small timber orders).
Absolutely. we specialise in matching existing profiles for renovation and restoration projects to ensure consistency in design and finish.
For a successful delivery, please ensure our driver has access to the delivery location. our driver will call upon arrival. if access is not available and goods cannot be delivered, the delivery fee will still apply. the goods will be returned to our premises, and you can either pay for a redelivery or arrange your own collection.
We do not provide installation services directly; however, we work with trusted installers who can assist with your decking project. for recommendations, please contact our decking specialists at 08 9434 5775 or sales@franzbuildingsupplies.com.au and we'll be happy to connect you with an experienced installer in your area.
At franz building supplies, we are committed to providing quality products and ensuring the safe delivery of all orders. to ensure a smooth and transparent process, we have outlined the following guidelines regarding the handling of damaged goods:
proof of delivery
once a delivery is complete, our driver will take a photograph of the goods as proof of delivery. this photo will serve as documentation that the goods were delivered in good condition at the time of delivery.
reporting damaged goods
if you discover that any goods are damaged upon delivery, you must notify us immediately. claims regarding damaged goods must be reported within 24 hours of delivery to ensure a prompt resolution. additionally, we require that you provide evidence that the damage occurred during transit and that franz building supplies is at fault. please note that this does not guarantee a refund or replacement.
responsibility for damage after delivery
if goods are damaged or stolen after the delivery is completed, franz building supplies is not responsible for any losses. our liability for goods ceases once the delivery is made, and the driver has captured proof of delivery.
replacement of damaged goods
if goods are found to be damaged due to factors beyond our control (e.g., handling by the customer, theft, or third-party damage), we are unable to provide a refund or replacement at no charge. if replacement goods are required, these will be charged to the customer at the full price.
we recommend inspecting all items at the time of delivery and immediately notifying our team of any discrepancies or damages so that we can address the situation as quickly as possible.
for any further questions or to report damaged goods, please contact us at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au.
Yes — our team can help you select hardware that suits your project’s style, function and technical requirements. Whether you’re replacing existing fittings or starting from scratch, we’re here to assist.
Deliveries are available for the perth metro area, covering regions from secret harbour to butler. for deliveries outside of this area, delivery fees are available upon request. to arrange a delivery, please contact us at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au, and we will coordinate a suitable delivery time.
Architectural hardware includes the functional and decorative fittings used on doors, windows and joinery. This covers items like handles, locks, hinges, sliding systems and seals that enhance both the performance and appearance of a space.
Installation
No, Eva-Last decking does not need sealing or staining. The protective capping ensures long-lasting colour and durability without ongoing treatment​.
Yes, the recommended screws depend on the decking range:
- Avenue range: use Cobra T-clips for hidden fastening. These clips allow for proper board spacing and thermal expansion. For edge boards, use self-drilling screws.
- Terrace range: install grooved boards with Cobra T-clips, and for square-edge boards, use stainless steel screws for secure direct fixing.
- Coastal range: similar to other ranges, use Cobra T-clips for hidden fixing and Stainless Steel screws for perimeter boards or direct fastening.
No, Modwood decking does not require sealing or staining. However, a sealer can be applied to areas that may be prone to high levels of staining, such as under covered spaces or alfresco areas.
Yes, Eva-Last composite boards can be used for fascia applications, enhancing the look of your deck while providing durability and low maintenance. Ensure you select compatible boards for fascia use​.
Yes, NewTechWood offers solid boards specifically designed for fascia and vertical applications. These boards provide a clean, seamless finish for staircases, edges, and other non-decking areas.
Eva-Last recommends Hulk fasteners, made from durable materials like 304-grade stainless steel, for secure installation and corrosion resistance. These fasteners are designed to prevent damage to the boards, provide a seamless finish, and are available in colours matching the decking for a polished look.
No, Millboard decking does not require sealing, staining, or painting. Its durable outer layer is designed to resist fading, staining, and wear, maintaining its appearance with minimal upkeep.
No, the Ultrashield® coating eliminates the need for sealing or staining, ensuring a low-maintenance surface resistant to fading, staining, and scratches.
NewTechWood recommends using stainless steel screws to prevent rust and maintain durability. Alternatively, their cobra hidden fastener system is specifically designed for a seamless finish and proper spacing.
Millboard recommends using Durafix screws specifically designed for its decking. These screws self-countersink and eliminate the need for pre-drilling.
For natural timber decking, use high-quality screws to ensure durability and a secure finish. Recommended options include:
- Blackhawk countersunk BH103D power 10: versatile and reliable for general applications.
- Blackhawk speed drive SS304 BH106D (10g x 50mm): ideal for environments with moderate exposure to moisture.
- Blackhawk speed drive SS316 BH108D and BH109D (10g x 50/65mm): perfect for high-corrosion areas, such as coastal locations.
- Wurth A2 deck screw 16675550: highly resistant to rust and suitable for all outdoor decking applications.
- Wurth RW20 driver bit (luminous orange): ensures smooth installation with precise fit.
Using stainless steel screws helps maintain the structural integrity and aesthetic of your timber decking.
We stock a variety of Blackhawk and Wurth stainless steel screws, as well as tools like Wurth RW20 driver bits for professional-grade installations, and brushes for oils and tint applications.
Yes, Eva-Last strongly recommends using their Hulk fasteners, which are specifically engineered for composite decking. These fasteners are designed to provide maximum hold without damaging the boards, thanks to their self-drilling capabilities and advanced thread design. Hulk fasteners are made from durable materials like 304-grade stainless steel, offering excellent resistance to corrosion, especially in coastal or humid environments.
Additionally, they are available in a range of colours to match the decking, ensuring a seamless and polished finish. Using these recommended fasteners not only ensures a professional installation but also maintains your deck’s warranty.
Trex recommends using the following fasteners for secure and aesthetically pleasing installation:
- Trex hideaway? hidden fasteners: these provide a smooth, screw-free deck surface.
- Trex ? decking screws: these are designed for visible fastenings with stainless steel or coated options to prevent corrosion.
We do not provide installation services directly; however, we work with trusted installers who can assist with your decking project. for recommendations, please contact our decking specialists at 08 9434 5775 or sales@franzbuildingsupplies.com.au and we'll be happy to connect you with an experienced installer in your area.
Modwood recommends using appropriate screws specified in their installation guide to ensure a secure fit and avoid splitting or damage. For concealed fixing, the Modwood Klevaklip system is highly recommended.
Performance and Durability
Millboard decking undergoes minimal expansion and contraction due to its polymer core. This makes it stable in extreme temperatures and prevents gaps or warping.
Use Cutek Extreme CD50 or Cutek wood preservative, which penetrate deeply to reduce moisture fluctuations. Regular maintenance keeps the timber stable and reduces the risk of splitting over time.
Yes, Modwood Flame Shield® decking is rated for bushfire-prone areas with a BAL-40 rating, making it suitable for high-risk zones. However, standard Modwood boards are not fire-rated and cannot be used in such areas.
Eva-Last composite decking is ideal for water-adjacent installations. Its moisture-resistant properties and anti-slip surface make it suitable for docks, pool surrounds, and beachfront properties​.
Yes, species like jarrah and Spotted Gumare naturally resistant to moisture. Enhance their protection with Cutek Extreme CD50, which resists fungal decay and controls moisture absorption.
Trex composite decking is built to last for decades, typically offering a 25-year lifespan or longer with proper care. The material is resistant to many of the issues that affect traditional wood, such as warping, rotting, and splintering.
Composite decking naturally expands and contracts with temperature changes. Proper installation with recommended gapping allows the boards to adjust without affecting their appearance or performance.
No, Millboard decking is highly resistant to fading. Its UV-stable surface maintains its vibrant colour for years, even in direct sunlight.
Yes, Trex composite decking expands and contracts with temperature fluctuations, as with most composite materials. To account for this natural movement, it?s essential to leave a gap between boards during installation. The recommended gap is 5mm to 8mm for end-to-end board spacing and 3mm to 5mm between side edges of the boards. These gaps ensure that the decking can expand and contract without causing buckling or warping.
Trex composite decking is designed to resist fading due to its durable, capped surface, but slight fading may occur over time due to exposure to the sun. However, it maintains its colour longer than many other decking options.
While Trex composite decking is scratch-resistant, it is not scratch-proof. Heavy furniture or sharp objects can cause scratches. Trex 's surface is designed to withstand normal wear, but it's advisable to avoid dragging furniture or sharp items across it.
NewTechWood decking features a fully capped layer that provides excellent UV protection. This means the boards retain their colour for many years, even in harsh sunlight, with only minor natural weathering.
Composite decking naturally expands and contracts with like all composite materials, Eva-Last decking experiences minor expansion and contraction with temperature changes. Proper installation with recommended spacing allows for this natural movement without affecting the deck’s performance.
No, Millboard’s durable surface is resistant to scratches from normal use, including foot traffic and furniture.
Eva-Last’s capped composite decking, like the Infinity and ApexPlus ranges, features scratch-resistant surfaces. However, using furniture pads and avoiding dragging heavy objects can help maintain the deck's pristine look.
Trex composite decking is ideal for wet environments like poolside or by the beach due to its moisture-resistant properties. The decking will not absorb water, which helps prevent mould and mildew growth.
Yes, it is highly water-resistant and ideal for use in coastal areas or poolside. The capped surface prevents moisture absorption, protecting against swelling, rotting, or warping.
Hardwoods like Spotted Gumand Blackbutt meet Australian bushfire resistance standards, making them suitable for decking in bal-rated areas.
Yes, like most outdoor materials, composite decking can absorb heat in direct sunlight, especially darker colours. To keep your deck cooler, consider lighter-coloured boards or adding shaded areas such as a pergola or awning.
Hardwoods like merbau, jarrah, and Spotted Gumoffer excellent durability. Apply Cutek Extreme CD50 to maximise longevity and enhance their natural resistance to weathering and decay.
Trex composite decking has a Class B fire rating, which means it is resistant to fire spread, making it a safer option for many residential applications. However, it is not entirely fireproof.
Yes, Millboard decking is water-resistant and suitable for use near pools, docks, and other water features. Its non-porous surface prevents water absorption and rot.
Yes, Trex composite decking is made from 95% recycled materials, including reclaimed wood and plastic. This makes Trex a sustainable option for decking, reducing the environmental impact compared to traditional wood.
The ultra-durable capped layer resists everyday wear, including scratches, stains, and scuffs. While no surface is entirely scratch proof, the boards are designed to withstand regular use without noticeable damage.
Modwood boards experience minimal color fade after their initial weathering period of a few months. This process allows them to settle into their natural, long-lasting tones.
Yes, like all composite materials, Modwood expands and contracts with temperature changes. Adequate spacing during installation is necessary to account for this movement.
Eva-Last products are engineered to resist fading. With UV-resistant capping technology, ranges like Infinity and ApexPlus maintain their vibrant colour for years, even under harsh sunlight​.
Trex recommends using screws designed for composite decking, such as those made from stainless steel or coated to resist corrosion. Avoid using regular wood screws as they can cause splitting or rust.
Hardwoods like jarrah, spotted gum, and merbau offer exceptional durability, natural resistance to termites and decay, and stunning aesthetics with rich grain patterns.
Yes, NewTechWood decking meets Australian fire safety standards and is rated for use in areas requiring BAL-29 compliance, making it suitable for bushfire-prone regions.
Yes, timber naturally weathers to a silver-grey patina. To preserve or enhance its original tone, apply Cutek Colourtones, available in shades like rustic gold and black ash. Regular applications of Cutek Extreme CD50 help slow down the weathering process.
Trex composite decking consists of a blend of recycled wood fibres and plastic, providing a durable, eco-friendly material. The decking is capped with a protective layer that helps prevent stains and fading while also making it low maintenance.
With proper maintenance, hardwood decking like Spotted Gumand jarrah can last 30 years or more, while treated pine provides excellent performance at a lower cost.
Modwood is designed to resist scratches, particularly on its brushed surface. However, heavy or sharp objects may still cause marks. Protective pads on furniture legs can help minimize scratches.
Modwood is ideal for use in marine or poolside environments. It is resistant to salt air and will not splinter, making it safe for bare feet.
Yes, certain Eva-Last decking products meet fire resistance standards. Apex, for example, achieves BAL-29 fire ratings, making it suitable for bushfire-prone areas in Australia.
Modwood decking is built for longevity and can last for decades with minimal maintenance. Its durability depends on proper installation and care.
Millboard decking is designed to last over 25 years with minimal maintenance, maintaining its structural integrity and aesthetic appeal.
Millboard composite decking has a BAL-19 rating under the Australian bushfire standards, meaning it can be used in areas that require this level of fire resistance, provided it is installed within a compliant system. The rating indicates that it is suitable for environments prone to ember attacks, radiant heat up to 19 kW/m², and some wind-borne debris without igniting. This makes Millboard a practical option for enhancing fire safety in decking applications.
Yes, Trex composite decking expands and contracts with temperature fluctuations, as with most composite materials. To account for this natural movement, it?s essential to leave a gap between boards during installation. The recommended gap is 5mm to 8mm for end-to-end board spacing and 3mm to 5mm between side edges of the boards. These gaps ensure that the decking can expand and contract without causing buckling or warping.
Pricing and Ordering
As a general guideline, allow approximately $60 per square meter for sub framing. For an accurate, tailored quote based on your specific project needs, please contact our decking specialists directly. You can reach us by calling 08 9434 5775, emailing sales@franzbuildingsupplies.com.au or visiting us at Shed C2, 174 Barrington Street, Bibra lake.
To place an order for Zanda products via Franz Building Supplies, we recommend starting by browsing the beautiful Zanda range online at zanda.com.au.
Once you have found what you are after, or if you would like some guidance, get in touch with our friendly and knowledgeable team. We are here to answer your questions, help with product selection and organise your order quickly and efficiently.
Whether you need something specific or want advice on hardware that suits your project, we are just a call or visit away.
For tailored pricing, please reach out to our decking specialists by calling 08 9434 5775, emailing sales@franzbuildingsupplies.com.au or visiting us at Shed C2, 174 Barrington Street, Bibra lake.
Trex offers a variety of colours across their decking collections. Some of the available shades include gravel path, Havana Gold, Island Mist, Lava Rock, Rope Swing, Spiced Rum, and Tiki Torch. These colours range from natural wood tones to more vibrant and rich hues, allowing you to find the perfect option for your outdoor space.
Yes, Trex can be used for fascia applications. It is important to use Trex fascia boards designed for this purpose to maintain the aesthetic and durability of your deck's edges.
To receive a detailed quote, please reach out to our decking specialists by calling 08 9434 5775, emailing sales@franzbuildingsupplies.com.au or visiting us at Shed C2, 174 Barrington Street, Bibra lake.
Prices for decking materials vary depending on the type of timber, design, and size of your project. For a tailored quote based on your specific project needs, please contact our decking specialists by calling 08 9434 5775, emailing sales@franzbuildingsupplies.com.au or visiting us at Shed C2, 174 Barrington Street, Bibra Lake.
No, Trex composite decking does not require sealing or staining. The capped surface protects the decking from moisture, staining, and fading, so no additional maintenance like staining or sealing is necessary.
Product education
MDF (Medium Density Fibreboard) is an engineered timber product made from wood fibres and resin, compressed under high pressure. It provides a smooth, uniform surface that’s ideal for painted finishes. Its stability, affordability, and consistency make it a popular choice for interior mouldings like skirtings and architraves.
Yes. Modern weatherboards, cladding, and linings are used across residential homes, commercial buildings, community centres, and more. They come in various profiles, finishes, and compliance ratings to suit all project types and building codes.
Zanda boasts an extensive selection of product ranges, encompassing various styles and finishes to suit different design preferences. Their offerings include multiple collections of door handles, pull handles, and accessories, each designed to cater to specific architectural styles and functional needs.
Product Information
We stock a wide range of premium decking timbers, including Jarrah, Blackbutt, Spotted Gum, Fijian Mahogany, Merbau, and Pine, catering to both residential and commercial projects..
Franz building supplies offers a wide selection of materials, including composite and hardwood decking, pre-primed mouldings (architraves and skirtings), weatherboard, cladding, and lining options. we also supply custom joinery, doors, frames, and jambs, along with structural timber such as pine and glulam beams. our architectural hardware, general hardware, and fixings cater to a variety of building needs.
Modwood decking is available in a carefully curated selection of colors that suit various styles and applications. The Natural Grain collection offers a realistic timber-like appearance with tones such as Black Bean, Jarrah, Silver Gum, and Sahara, which range from deep browns and warm reds to lighter, contemporary greys.
For fire-rated areas, the Flame Shield® range is available in matching colors to the Natural Grain collection, providing continuity in design for bushfire-prone zones while ensuring compliance with BAL-40 requirements. These colors retain the wood-grain texture for an authentic look.
Each shade in the Modwood lineup is designed to complement outdoor spaces, providing both aesthetic appeal and functionality. The color palette may appear slightly different in varying lighting conditions, so viewing samples is recommended for accurate selection.
At Franz Building Supplies, we proudly stock a wide range of high-quality brands trusted by professionals in the building and construction industry. Our product offerings include brands known for their reliability, innovation, and durability, ensuring that our customers have access to the best materials available.
Hardwoods like Spotted Gumand Jarrah are highly scratch-resistant. Using Cutek products helps maintain their surface integrity and reduces the visibility of wear and tear.
We supply both trade professionals and the general public. whether you're a contractor, builder, or diy enthusiast, you’re welcome to shop with us.
- Avenue range: available in contemporary shades that include Antique, Teak, and Walnut. These tones emulate natural wood grains and suit various styles, from coastal to modern looks.
- Terrace range: features elegant, multi-chromatic finishes such as Blackbutt, Antique, Teak, Ipe, and Silver Grey. Each board is double-sided, offering versatility in design.
- Coastal range: includes light and stylish hues like Beech and Antique. These shades work perfectly for Hamptons or beach-inspired aesthetics.
The Pioneer range offers natural, earthy tones designed to mimic traditional timber while providing superior durability and low maintenance:
- Blackbutt: a warm, golden brown with subtle grain variations.
- Blackbutt Natural: a lighter, more natural tone with a refined wood appearance.
- Spotted Gum: a rich, medium brown with distinctive grain patterns that evoke a traditional, rustic look.
We provide trade accounts and tailored pricing for industry professionals. contact us to learn more about eligibility and account setup.
Our experienced team is here to assist with more than just decking, cladding, and joinery. we provide expert advice across a wide range of building materials, including timber, hardware, fixings, and architectural elements. whether you’re working on a residential renovation, commercial build, or custom joinery, we’ll guide you in choosing the best products for your specific requirements. from design concept to material selection, we aim to ensure your project runs smoothly and meets your expectations.
Yes, Millboard is ideal for fascia applications. Its lightweight, durable design and pre-moulded fascia boards allow for seamless finishing on stair risers, deck edges, and vertical surfaces.
Yes, Modwood decking can be used for fascia applications. Installation instructions should be followed to ensure proper ventilation and support.
Eva-Last offers a diverse and expansive colour palette across its decking ranges, including Pioneer, ApexPlus, and InfinityIS, ensuring there's a perfect match for any design preference. Whether you're looking for classic natural timber tones or sleek modern hues, Eva-Last provides an array of options to suit various styles and outdoor settings.
Yes, we provide cutting services to help you get materials prepared to your exact specifications. contact us for details on this service.
The ApexPlus range from Eva-Last offers the following stunning dual-tone colours, designed to enhance your outdoor spaces with a natural wood look:
- Alaskan Driftwood: a soft grey with subtle weathered tones, perfect for coastal-inspired designs.
- Himalayan Cedar: a rich, earthy red-brown that mimics traditional cedar wood with a deep, natural hue.
- Hawaiian Walnut: a warm, inviting brown with deeper, contrasting streaks, ideal for a rustic yet refined aesthetic.
Millboard decking is crafted from a unique polymer resin core, topped with a durable, hand-moulded polyurethane outer layer. This construction mimics the appearance of natural wood while offering superior durability and resistance to wear.
Apply Cutek Colourtones, available in options like Burnt Ash and Smokey Grey, to highlight or transform the wood’s appearance. These oils protect against UV rays and maintain a vibrant finish.
Absolutely. we specialise in matching existing profiles for renovation and restoration projects to ensure consistency in design and finish.
Modwood is composed of a blend of recycled wood fibers and plastics, making it both durable and environmentally friendly.
Safety
Yes, species like Jarrah and Merbau are dense and strong, ideal for supporting heavy furniture or structures. Always consult with a professional for structural assessments.
Yes, Millboard decking is highly slip-resistant due to its textured surface, even in wet conditions.
Timber decks can become slippery when wet or covered in moss or algae. Regular cleaning with Cutek Quickclean and applying anti-slip coatings can improve safety, especially in high-traffic or poolside areas.
The textured finish of NewTechWood decking enhances grip, providing excellent slip resistance in wet or dry conditions, making it safe for use around pools, patios, and walkways.
Yes, Trex decking features a slip-resistant surface, which is especially beneficial for pool decks and areas exposed to moisture. The texture helps reduce the likelihood of slipping even when wet.
Eva-Last decking is designed with slip resistance in mind. Textured surfaces, especially in the InfinityIS range, provide excellent traction, even when wet, making it a safe choice for poolside or wet areas​.
Applying Cutek Extreme CD50 helps minimise cracks and splinters. Regular sanding and recoating also keep the surface smooth and safe for bare feet.
Yes, Modwood decking has excellent slip resistance. The Natural Grain collection has a non-slip rating of R11, and the Xtreme Guard® range has the highest rating of P5, making it ideal for wet areas.
Warranty
Eva-Last decking, particularly the ApexPlus range, is engineered to stay cooler than many traditional decking materials. Lighter colours in the range, such as Himalayan Cedar, reflect more sunlight, retaining less heat. While all materials warm under direct sunlight, Eva-Last’s innovative design helps minimise heat retention, ensuring a more comfortable surface for outdoor use.
With proper installation and care, NewTechWood decking offers a lifespan of over 25 years and is backed by a 25-year limited warranty for residential use​.
Trex offers a 25-year limited warranty for residential use, covering material defects, fading, and staining. This warranty provides peace of mind, ensuring that Trex products will perform well for many years.
NewTechWood offers a 25-year residential warranty on their composite decking products, which covers defects in material and workmanship under normal use. This warranty ensures that the boards will remain free from warping, cracking, and other structural issues for a significant period. NewTechWood also provides a separate 10-year commercial warranty for decks used in commercial applications. It’s important to follow proper installation guidelines to ensure that the warranty remains valid.
Zanda stands behind the quality of its products, offering warranties that cover defects in material or workmanship under normal use. Specific warranty periods and terms can vary by product, so it's advisable to consult the warranty information provided with each item or contact Zanda directly for detailed coverage information.
Millboard offers a 25-year residential warranty against structural damage, rot, and insect infestation, ensuring long-lasting performance.
Eva-Last provides industry-leading warranties, which vary by product range. For instance, the InfinityIS range comes with a 25-year warranty, while others like the ApexPlus range offer even longer coverage for residential use. These warranties cover manufacturing defects and ensure peace of mind for users.
Modwood offers a warranty of up to 10 years for residential installations, covering material defects and issues arising from normal use.
At franz building supplies, we are committed to providing quality products and ensuring the safe delivery of all orders. to ensure a smooth and transparent process, we have outlined the following guidelines regarding the handling of damaged goods:
proof of delivery
once a delivery is complete, our driver will take a photograph of the goods as proof of delivery. this photo will serve as documentation that the goods were delivered in good condition at the time of delivery.
reporting damaged goods
if you discover that any goods are damaged upon delivery, you must notify us immediately. claims regarding damaged goods must be reported within 24 hours of delivery to ensure a prompt resolution. additionally, we require that you provide evidence that the damage occurred during transit and that franz building supplies is at fault. please note that this does not guarantee a refund or replacement.
responsibility for damage after delivery
if goods are damaged or stolen after the delivery is completed, franz building supplies is not responsible for any losses. our liability for goods ceases once the delivery is made, and the driver has captured proof of delivery.
replacement of damaged goods
if goods are found to be damaged due to factors beyond our control (e.g., handling by the customer, theft, or third-party damage), we are unable to provide a refund or replacement at no charge. if replacement goods are required, these will be charged to the customer at the full price.
we recommend inspecting all items at the time of delivery and immediately notifying our team of any discrepancies or damages so that we can address the situation as quickly as possible.
for any further questions or to report damaged goods, please contact us at (08) 9434 5775 or email sales@franzbuildingsupplies.com.au.
Get your project underway today
